How do I change the bulb in my Hitachi projection TV?

Hitachi TV Rear Projection Bulb Replacement Instructions
  1. Turn the Hitachi television off and unplug the unit.
  2. Pull the front cover outward to remove it from the unit.
  3. Remove the screw holding the lamp door in place.
  4. Unscrew the two screws holding the lamp in place.
  5. Slide the replacement lamp into the television.
  6. Replace the screws on the new lamp unit.

Complete info about it can be read here. Hereof, how do I fix the color on my Hitachi projection TV?

Pres the "Select" button repeatedly to alternate the color of the adjustment point between white, red and blue. Use the arrow keys to match the red and blue colors to green. When the colors are aligned, they appear as white. Press the arrow keys to move the cursor to a different point and repeat as needed.

Beside above, how do you change a lamp in a JVC rear projection TV? Step One: To replace the lamp: On the back of your TV locate the lamp door on the left side. Use a flat screw driver to unlock it and remove it. Step Three: Remove the lamp cover from the TV. Step Four: the two screws holding the JVC TS-CL110UAA TV Lamp in place.

Besides, how do I change the bulb in my Hitachi projector?

Hitachi Projector Lamp

  1. Turn off the unit and unplug the power cord.
  2. Remove the lamp cover then remove the 2 screws that hold in the projector lamp.
  3. Pull lamp out by the handle then insert the new lamp replacement.
  4. Now tighten the 2 screws and install the lamp cover.
  5. Plug unit back in and turn on the projector.

What is DLP lamp?

A DLP (digital light processing) lamp is the main source of light in a rear screen projection television set. DLP lamps do tend to age after a few years, with the length of time depending on the brand used and how many hours you have your TV set on.