How do you make a herb planter out of a pallet?

Directions:
  1. If necessary, sand the pallet down with sandpaper.
  2. Roll out some of your landscaping fabric and cut pieces to fit the width of the pallet.
  3. Staple the fabric onto the back of the pallet and underneath.
  4. Repeat step 3 on each level until each section of the pallet is now a planter.

Click to read further detail. Also to know is, how do you make a herb box?

Fresh Taste: DIY Herb Box

  1. Step 1: Cut and Sand Wood. Cut the following pieces of wood:
  2. Step 2: Assemble the Box. To assemble, place one longer piece on level surface as the base.
  3. Step 3: Hide the Nails.
  4. Step 4: Prep for Stain.
  5. Step 5: Fill Nail Holes (Optional)
  6. Step 6: Stain Wood.
  7. Step 7: Seal Wood.
  8. Step 8: Add Plants.

Subsequently, question is, how can I get free pallets? Here are ten sources for free, clean pallets:

  1. Bars and craft beer locations.
  2. Pet food stores.
  3. Feed & Tack stores.
  4. Stationary shops.
  5. Furniture stores.
  6. Liquor stores.
  7. Schools.
  8. Flooring stores.

Herein, can pallets be used for gardening?

Pallets that are heat treated and debarked are most likely safe for use. Avoid using pallets treated with methyl bromide or pallets that do not display and IPPC logo for food gardening or furniture projects.

Can I use pallets for raised beds?

Taking the pallets apart was the hardest part of getting these planter beds together! We decided to make our garden beds three boards high, two boards long, and one board wide. So we sorted the wood into similar lengths and widths and made groups of boards that would be used together to make one bed.